Paint, Ink & Adhesives
Legend of Icons| Product | Data Sheet | Total Solids % | Description |
|---|---|---|---|
| AdvaPel® 746 |  |
10 |
Waterborne, short-chain, fluorochemical emulsion designed to impart water, oil and stain repellency to hard surfaces. Advapel 746 is based on non-C8 chemistry and, as such, is considered to be non-PFOA contributing. AdvaPel 746 is suitable for use in consumer prouducts that will be applied by pump spray.
 |
| AP-SILANE 21 | |
NA |
Vinyltrimethoxy silane coupling agent that can be used to improve adhesion between organic coatings and inorganic fillers and substrates. AP-SILANE 21 is recommended for crosslinking polyethylene. |
| AP-SILANE 22 | |
NA |
Vinyltriethoxy silane coupling agent that can be used to promote adhesion between orgainc coatings and inorganic fillers and substrates. AP-SILANE 22 is reommended for crosslinking polyethylene. |
| AP-SILANE 31 | |
NA |
Amino-functional silane coupling agent. Water soluble. Compatible with epoxy, phenolic, melamine and furan resins. |
| AP-SILANE 32 | |
NA |
Amino-functional silane coupling agent that will impart superior adhesion and strength properties. AP-SILANE 32 is compatible with epoxy, phenolic and melamine resins. |
| AP-SILANE 32T | |
NA |
Technical grade amino functional silane coupling agent that can be used with epoxy, phenolic, melamine and other organic resins to improve adhesion and structural strength. |
| AP-SILANE 33 | |
NA |
Amino functional silane coupling agent that will impart superior adhesion and increased strength to reinforced phenolic, acrylic, melamine and epoxy thermoset systems. |
| AP-SILANE 51 | |
NA |
Epoxy functional silane coupling agent that can be used with epoxy, phenolic an melamine resin systems to enhance adhesion and increse strength. |
| AP-SILANE 71 | |
NA |
Methacryloxy-functional silane coupling agent recommended for use with unsaturated polyester and other thermoset composites. |
| AP-SILANE 71T | |
NA |
Technical grade of a methacryloxy-functional silane coupling agent that can be used to improve adhesion and strength in coatings, composites, adhesives and sealants that cure via free radical reaction. |
| AP-SILANE 81 | |
>98% Active |
Mercaptopropyl trimethoxy silane coupling agent that can be used to improve adhesion and strength characteristics when bonding rubber to inorganic substrates. |
| AP-SILANE 90 | |
NA |
Trimethoxymethylsilane coupling agent that will impart a high degree of hydrophobicity to treated surfaces. |
| APFS-14 | |
27% Active Content |
Amphoteric fluorosurfactant primarily designed to reduce the surface tension of aqueous solutions to promote leveling and wetting. In some systems, APFS-14 will also function as a foam stabilizer. |
| APFS-16 | |
22% Active Content |
Nonionic fluorosurfactant that will enhance leveling and wetting in solvent based systems. APFS-16 will also produce stable foam in low polarity hydrocarbon liquids such as kerosene and diesel fuel. |
| APFS-27-40 | |
40% Active Content |
Water-borne, nonionic, fluorosurfactant that will impart excellent wetting and leveling properties. APFS-27-40 is very effective on hard to wet surfaces such as plastics, oily or waxy substrates, and fluoropolymer or silicone treated fabrics.
|
| APFS-70S | |
50% Active Content |
VOC free, water-borne, nonionic, fluorinated surfactant based on short-chain fluorochemical technology. APFS-70S has exceptional stability and provides outstanding wetting and leveling properties, even on difficult to wet surfaces.
|
| APFS-71S | |
25% Active Content |
VOC free, water-based, nonionic, short-chain, fluorosurfactant designed to enhance leveling and wetting in waterborne systems.
|
| APFS-74S | |
13% Active Content |
VOC free, water reducible, short-chain anionic fluorosurfactant that produces very low surface tensions in aqueous solutions. APFS-74S is APEO free.
|
| APFS-75S | |
20% |
APFS-75S is a short-chain anionic water-based fluorosurfactant dispersion that gives low aqueous surface tension only achievable with fluorosurfactants
|
| APFS-76S | |
30% |
APFS-76S is a short-chain nonionic water-based fluorosurfactant that was designed to provide excellent cleanability and oil repellency when added to flat finish architectural paints and water based coatings.
|
| APG-1430 | |
13 |
Waterborne fluoropolymer solution that will protect hard surfaces from water, oil, chemicals, stains and soil.
|
| API-188 | |
35 |
Nonionic emulsion of polyethylene resin that will increase abrasion resistance, strength and durability in a wide range of coatings and finishes.
|
| API-CPO-803 | |
57 |
High solids, solvent solution of maleic anhydride modified chlorinated polypropylene that can be added to paints and coatings to improve adhesion on EPDM, polypropylene or TPO substrates. |
| APS-210 | |
NA |
Solvent reducible, hydroxy modified, reactive silicone fluid that is easily crosslinked into linear polymers using suitable catalysts. |
| APS-260 | |
100 |
Silicone resin powder that can be used as a coating or resin modifier to impart lubricity and abrasion resistance.
|
| APS-262 | |
100% Active |
Low viscosity, alkoxy functional polysiloxane that will react in the presence of moisture to produce a flexible, durable protective film on a variety of substrates.
|
| APS-442 | |
100% Active |
Waterborne silicone surfactant that reduces surface tension and improves leveling and wetting properties.
|
| APS-D4 | |
NA |
VOC exempt diluent for solvent based paint, ink, cosmetic, personal care, industrial cleaning and carrier formulations. |
| APS-ME142D | |
30 |
Waterborne silicone resin/silane microemulsion designed to impart water repellency to hard surfaces including grout, concrete, masonry, natural stone and unglazed tile. Small particle size enables superior penetration without a change in appearance of the treated surface.
|
| APS-ME143 | |
27 |
Waterborne silicone resin/silane/fluorochemical microemulsion designed to impart water repellency and stain resistance to hard surfaces including grout, concrete, masonry, natural stone and unglazed tile. Small particle size enables superior penetration without a change in appearance of the treated surface.
|
| APW-319 | |
17 |
Very low turbidity, cationic microemulsion of pure carnauba wax that provides a durable finish, with excellent gloss and slip, that resists marring and dirt pick-up. APW-319 can be used on a variety of substrates including fabric, leather, wood, metal and painted surfaces.
|
| Daimul 60 | |
60 |
Solvent free, waterborne, 60% active emulsion of 350 centistoke dimethyl fluid that will impart high gloss and slip to substrates including rubber, plastic, vinyl, leather and metal.
|
| DAISIL NSNM-100 | |
100 |
Solvent or water reducible, VOC free, non-silicone defoaming agent. |
| Hardlen® 13LP | |
100 |
Solvent soluble chlorinated polypropylene adhesion promoter that will improve adhesion of coatings and inks on polyolefin substrates.
Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® 14LWP | |
100 |
Solvent soluble chlorinated polyolefin product that is effective as a primer or coating additive to enhance adhesion to polypropylene, TPO and EPDM substrates. Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® 16LP | |
100 |
Solvent soluble chlorinated polypropylene product that is effective as a primer, coating additive or adhesive for polypropylene, TPO, EPDM and other olefin based substrates. Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® BS-40 | |
40 |
Low molecular weight, high chlorine content, polyolefin resin designed to be used to improve adhesion of coatings, inks and adhesives to olefin based substrates such as polypropylene, TPO and EPDM. Hardlen BS-40 has very good compatability with a wide range of resin systems. Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® CY-9122P | |
100 |
Maleic anhydride modified chlorinated polypropylene resin that will improve interlayer adhesion between topcoats and olefin-containing substrates including polypropylene, EPDM and TPO. Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® DX-523P | |
100 |
Chlorinated polypropylene adhesion promoter designed for use in UV/EB coatings for polypropylene, TPO and EPDM substrates. Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® DX-530P | |
100 |
Chlorinated polypropylene adhesion promoter designed for use in UV/EB coatings and inks for polypropylene, TPO and EPDM surfaces. Hardlen® is a registered trademark of Toyobo Co. Ltd. |
| Hardlen® EH-801 | |
30 |
Solvent free, water-based, binder/primer that will impart superior adhesion to polypropylene, EPDM and TPO without pretreatment. Requires a high bake temperature. Hardlen® is a registered trademark of Toyobo Co. Ltd.
|
| Hardlen® EW-5303 | |
30 |
Flexible, solvent free, water-based, binder/primer that provides strong adhesion to polypropylene, TPO and EPDM substrates. Hardlen® is a registered trademark of Toyobo Co. Ltd.
|
| Hardlen® EW-8511 | |
30 |
Solvent free, water-based, flexible, binder/primer that provides strong adhesion to polypropylene, TPO and EPDM substrates. Hardlen EW-8511 has an excellent affinity for polyurethane based paints. Hardlen® is a registered trademark of Toyobo Co. Ltd.
|
^ Back to Top ^
